Konica Minolta bizhub PRESS 1250 User Manual page 381

8.8 Using Perfect Binder PB-503
3
Open the perfect binder tray front door.
% The perfect binder tray front door does not open while the
machine is delivering finished books onto the perfect binder
tray, or sliding them with the feeding button pressed.
4
Slowly withdraw the carriage.
% Be sure to withdraw the carriage slowly. Otherwise, the piled
books may collapse.
5
When moving the carriage with books piled on it, use the book
holding plate and book stopper to fix the books onto the car-
riage, in order to prevent them from collapsing.
% Move the book holding plate lever to align the plate to the
books.
% Insert the book stopper into the desired positioning hole on
the carriage to align it to the books.
6
Take out the books from the carriage.
% Before taking out the books, be sure to remove the book holding plate and book stopper, if used.
7
Return the carriage to its original position, then close the perfect binder tray front door.
8
If the column of books is left on the right side of the tray, repeat steps from 2 to 7.
bizhub PRESS 1250/1052
8
8-56