Sorting Copies: Sort/Group/Offset Sort/Offset Group - Konica Minolta bizhub PRESS 1250 User Manual

8.4 Using Finisher FS-532
Original
Example
Make 3
printed
sets
This section describes the following output modes:
-
Sort/Group/Offset Sort/Offset Group output to the primary (main) tray
-
Sort/Group output to the secondary (sub) tray
-
Staple output to the primary (main) tray
8.4.1

Sorting Copies: Sort/Group/Offset Sort/Offset Group

A machine installed with Finisher FS-532 is initially set to output sorted sets to the primary (main) tray, re-
gardless of whether or not to be equipped with other options.
Please select an output mode by following the procedure below.
d
Reference
You can change the initial output mode from the Utility menu. For details, see Section 7 of the POD Admin-
istrator's Reference.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Output Setting].
The Output Setting Screen will be displayed.
% The tray currently selected appears highlighted on the front image of the machine. If the primary
(main) tray is not selected, press the primary (main) tray position key to highlight it.
4
Select the desired output mode.
% Select one of [Offset Sort], [Sort], [Offset Group], and [Group] keys.
bizhub PRESS 1250/1052
Output
Sort
Face Up Face Up
and 1 to N and N to 1
Group
Face Down Face Up
and 1 to N and 1 to N
Face Up Face Down
and N to 1 and 1 to N
8-17
8