Konica Minolta bizhub PRESS 1250 User Manual page 497

12.1 Cleaning
2
Open the tray stand.
NOTICE
Never fail to open the tray stand; otherwise the machine may be
damaged.
3
Clean the surface of the two conveyance belts with a soft cloth
dampened slightly with alcohol (cleaner).
4
Move the conveyance belt to clean the whole length.
% Raise the two belts lightly, then pull them both forward at the
same time in order to show the hidden parts.
% Clean the belts using a soft cloth dampened with alcohol
(cleaner).
% Repeat steps 2 and 3 (about three times) to clean the whole
round of the belt.
NOTICE
Do not raise the belt higher than need be. Or, never fail to pull
the two belts at the same time. Otherwise, machine trouble may
be caused.
5
Clean the bottom plate of the folder tray.
% Wipe the whole surface of the bottom plate with a soft cloth
slightly dampened with alcohol (cleaner).
6
Return the tray stand to its original position, then return the folder tray.
NOTICE
Never return the saddle stitcher tray to its original position with the tray stand opened.
bizhub PRESS 1250/1052
12
12-4