Tray Empty In A Copy Job In Progress - Konica Minolta bizhub PRESS 1250 User Manual

11.5 If [MACHINE] Tab Flashes in Orange
11.5.2

Tray Empty in a Copy Job in Progress

When the tray being used in the current copy job becomes empty, the machine immediately stops the output
operation and displays the message [Please load paper in tray #] on the screen.
Two methods are provided to restart the output:
-
Supplying the tray with paper
-
Changing the tray selection
Follow each procedure to restart the output job.
Supplying the tray with paper
1
Load paper in the empty tray.
% For details on loading paper, see page 5-7.
NOTICE
Be sure to load the same paper as that loaded before. The machine cannot restart the printing operation
with a different paper size loaded. Using different paper type or weight may cause paper misfeed or
machine trouble.
When the tray is supplied with paper, the message will change to [Press [Start] to restart].
2
Press Start on the control panel.
Output operation will resume using the tray supplied with paper.
Changing the tray selection
1
Press [Confirm Detail].
bizhub PRESS 1250/1052
11
11-18