Cleaning The Corona Wire; Removing/Inserting Paper Trays - Konica Minolta 1216 User Manual

Maintenance and Supplies

Cleaning the Corona Wire

Occasionally cleaning the corona wire will help to maintain optimal
copy quality and efficient operation of the copier. Cleaning of the
corona wire is recommended approximately every three months.

Removing/Inserting Paper Trays

When loading paper or clearing mishandled paper, it may be
necessary to remove the paper trays.
8-4 Maintenance and Supplies
1 Press release buttons located
on left and right sides of copier
and open front door.
2 Slowly slide wire cleaning knob
in and out (in direction of arrow
as shown) five or six times.
3 Close copier front door.
1 Withdraw paper tray.
2 Carefully lift the front sides of
the tray and remove the tray.
3 To insert tray, lift the front
sides of the tray and align the
drawer rails to the tray rails.
4 Push in the tray completely.