Cancelling Tandem Mode Printing On The Partner Mfp Only - Konica Minolta bizhub PRESS 1250 User Manual

8.10 Using Two Machines in Tandem: Tandem Mode
% Press [Continue] to continue the scanning/printing job.
8.10.4

Cancelling Tandem Mode Printing on the Partner MFP Only

Follow the procedure below to cancel printing on the Partner MFP and continue on This MFP.
1
Press Stop on the control panel of the Partner MFP.
The Partner MFP stops printing immediately, and a confirmation
dialog appears on the screen of the Partner MFP. At this time,
the tandem mode is not yet released.
% If temporary suspension in the Partner MFP takes a long
time, the Distribution Recovery mode will be activated to en-
able This MFP to take over the remaining print quantity.
2
Press [Cancel Job].
This will release the tandem mode and cancel printing on the Partner MFP.
% Press [Continue] to continue the tandem mode printing stopped temporarily on the Partner MFP.
bizhub PRESS 1250/1052
8
8-66