Loading Tabbed Paper In Paper Feeder Unit Pf-703/Pf-706 - Konica Minolta bizhub PRESS 1250 User Manual

5.5 Loading Tabbed Paper
% Press the lock release lever of the front side guide to move the guides, and also move the rear guide
to the edge of tabbed paper.
NOTICE
Be sure that the side guides and rear guide are securely aligned to the paper. Otherwise, the machine
cannot detect the correct paper size, and machine trouble may be caused.
5
Push in the tray until it locks into place.
5.5.2

Loading Tabbed Paper in Paper Feeder Unit PF-703/PF-706

Example: 9 sheets of tabbed paper loaded in position for 3 finished sets
Loading orientation
PF-703
PF-706
1
Withdraw a paper feeder unit tray, and then open the feed roller.
% Withdraw the tray specified for a tab paper size.
% Paper Feeder Unit PF-703 does not have the feed roller attached.
2
Loosen the guide fixing knobs of the side guides.
3
Load tabbed paper into the tray.
% Place tabbed paper on the tray referring to the illustration shown above.
NOTICE
Do not load above the limit level indicated on the side guide of the tray.
Carefully load paper to be seated under the paper control lever at the air nozzle.
4
Align the side guides to the edge of tabbed paper, then turn the guide fixing knobs to fix them.
NOTICE
Be sure that the side guides and rear guide are securely aligned to the tabbed paper. If 0.04 inches or
more of a gap is found or tabbed paper skews in the tray, feeding trouble may be caused.
5
Align the rear guide to tabbed paper.
6
Push in the tray until it locks into place.
bizhub PRESS 1250/1052
Stacking order
Printed/
Copied side
1st TAB
2nd TAB
3rd TAB
Finished set
1st TAB
2nd TAB
3rd TAB
3 FINISHED SETS
5
5-28