Table of Contents
Advertisement
Chapter 2 Preparations before using the copier
Removing Protective Packing Materials
The copier comes packed with protective materials to protect it from
damage during transportation. Be sure to remove all of the protective
packing material before installing the copier, and store the material in
a convenient location for future use.
1. Remove the four protective materials
from the four corners of the platen
cover.
Three (3) screws secure the optical unit.
2. Remove two of the screws from the
left and right sides of the upper
cover.
3. While holding the upper unit with one
hand, press the upper unit release
button to open the unit.
Remove the mat from the manual
feed bypass tray.
NOTES:
• Use care to prevent the upper
unit from popping up.
• Open the upper unit until it clicks.
4. Remove the screw from the drum
unit fixing area.
5. Pull out the drum unit.
NOTES:
• Do not touch the drum surface.
Touching the drum may mark or
scratch it.
• Do not expose the drum unit to
light for longer than 5 minutes.
2-2
Upper unit
release
button
Advertisement
Table of Contents
