Replenishing Staple Supply In Finisher Fs-532 For Saddle Stitching - Konica Minolta bizhub PRESS 1250 User Manual

5.6 Replenishing Staple Supply
d
Reference
For how to display the help message, see page 5-3.
5.6.2

Replenishing Staple Supply in Finisher FS-532 for Saddle Stitching

When the finisher is mounted with Saddle Stitcher SD-510 and the stapler in the saddle unit becomes emp-
ty, the following message will appear in the message area of the screen.
[Pull out staple finisher saddle unit / then, set staples in stapler]
Also, the message [Staple Cartridge Supply] appears and its indicator lights in red in the Supply/Scrap Parts
area of the Machine Screen.
Follow the procedure below to add staples to the stapler in the saddle unit.
1
Display the help message on the Machine Screen, then press [Consumable/Scrap].
2
Press the [Add Staples] tab at the top of the help message area.
bizhub PRESS 1250/1052
5
5-31