Recalling Stored Job Settings - Konica Minolta bizhub PRESS 1250 User Manual

10.5 Storing and Recalling Job Conditions: Mode Memory
Press [OK] to return to the Mode Memory Screen. Check that the job name has been correctly entered
on the selected key.
9
Press [OK] on the Mode Memory Screen.
The Copy Screen will be restored.
d
Reference
You can lock the used job number key so that the stored settings cannot be overwritten, or unlock the locked
key. Also, you can delete the stored job settings. This operation is available in the Administrator Setting on
the Utility menu. For details, see Section 7 of the POD Administrator's Reference.
10.5.2

Recalling Stored Job Settings

Follow the procedure below to recall job settings that are already stored.
0
Be sure to display the Copy Screen before pressing Mode Memory on the control panel to display the
Mode Memory Screen. You cannot access the Mode Memory Screen from another screen such as the
Machine Screen.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press Mode Memory on the control panel.
The Mode Memory Screen is displayed.
4
Press the job number key that you want to recall.
bizhub PRESS 1250/1052
10
10-13