Siemens Brodersen MC55 AT Command Manual page 69

At command manual
Table of Contents

Advertisement

4
5
If the type is 2, 4 or 5,
AT+COPS
(num)
<mode>
0
1
2
<vmCounter>
If delivered by the network: Number of new voice messages sent as part of the Voice Message Waiting Indicator.
Refer to <indDescr>.
<eonsOperator>
Operator in format which depends on the type associated to the operator name. Refer to <indValue>.
(str)
<servProvider>
Service Provider Name according to the status settings (SIM Service No. 17) in the SIM Service Table (SST) of
the SIM.
<nitzUT>
Universal Time delivered as part of the "nitz" Indicator. Refer to <indDescr>.
<nitzTZ>
Time Zone delivered as part of the "nitz" Indicator. Refer to <indDescr>.
<nitzDST>
Adjustment for Daylight Saving Time as part of the "nitz" Indicator. Refer to <indDescr>.
Example
Activation and use of indicator "audio":
AT^SIND="audio",1
^SIND: audio,1,0
OK
AT+CMER=2,,,2
OK
+CIEV: battchg,5
+CIEV: signal,99
+CIEV: service,1
MC55_ATC_V04.00
Confidential / Released
Any operator name stored internal to the ME (alphanumeric format, can con-
tain up to 16 characters).
Broadcast MCC-MNC (numeric format which consists of a 3-digit country code
plus a 2- or 3-digit network code).
with the appropriate
<mode>
Indicator is deregistered, i.e. no such indicator event report (URC) will be
issued. <mode>=0 is power-up and factory default of indicators defined by
only.
AT^SIND
Indicator is registered.
Indicator event reports are controlled via AT+CMER.
All indicators can be registered or deregistered via AT^SIND, but different
default settings apply: Power-up and factory default of the indicators sup-
ported by
is <mode>=1, while, as stated above, indicators defined
AT+CIND
by
only are set to <mode>=0.
AT^SIND
Query the registration status and the current value of a single indicator type.
You register the indicator "audio".
You activate the Indicator Event Report with AT+CMER.
A set of all registered URCs is presented. (Please note that the example
includes the indicators registered due to the power-up default settings
of AT+CIND.)
Page 69 of 475
displays the same operator name.
3/17/06

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brodersen mc55

Table of Contents