Table of Contents
Advertisement
13.23
AT^SSDA Set SMS Display Availability
This command allows to notify the MC55 of its controlling application's capability to immediately display incoming
SMS on a display.
If the application is able to display incoming short messages, a class 0 message shall be displayed immediately.
However, if it does not, class 0 messages shall be treated as if no message class is determined (GSM 03.38[17]).
The effect of this command if <da>=1 is to determine the behavior of parameter
If <da>=1 and <mt>=1 incoming class 0 mesages need to be acknowledged with
and AT+CSMS)
If multiplex mode is enabled (AT+CMUX) and <da>=1 with <mt>=1 is set on any logical channel, all other chan-
nels have to use <mt>=0.
Syntax
Test Command
AT^SSDA=?
Response(s)
^SSDA:list of supported <da>s
OK
Read Command
AT^SSDA?
Response(s)
^SSDA:<da>
OK
Write Command
AT^SSDA=<da>
Response(s)
OK
Reference(s)
SIEMENS
Parameter Description
(num)
<da>
Display Availability
(&F)
0
1
Note
•
If the ME operates on different instances (MUX channels 1, 2, 3 or ASC0/ASC1) avoid different settings for
routing and indicating short messages. For example, if messages shall be routed directly to one instance of
the TE (set with AT+CNMI, AT^SSDA), it is not possible to activate the presentation of URCs with
or
on another instance. Any attempt to activate settings that conflict with existing settings on
AT+CNMI
another interface, will result in CME ERROR, or accordingly CMS ERROR.
MC55_ATC_V04.00
Confidential / Released
PIN
!
Application is not able to display incoming short message
Application is able to display incoming short message
Page 366 of 475
<mt>
AT+CNMA
ASC0 ASC1
MUX1
MUX2
%
%
%
%
of AT+CNMI:
(see also
AT+CNMI
MUX3 Charge
Last
%
!
!
!
AT+CMER
3/17/06
Advertisement
Table of Contents
