Siemens Brodersen MC55 AT Command Manual page 153

At command manual
Table of Contents

Advertisement

^SLCC:
1,0,2,0,0,0,''1234567'',129,''Called
Party''
^SLCC:
^SLCC:
1,0,2,0,0,1,''1234567'',129,''Called
Party''
^SLCC:
^SLCC:
1,0,3,0,0,1,''1234567'',129,''Called
Party''
^SLCC:
^SLCC:
1,0,0,0,0,1,''1234567'',129,''Called
Party''
^SLCC:
atd23456;
OK
^SLCC:
1,0,1,0,0,0,''1234567'',129,''Called
Party''
^SLCC: 2,0,2,0,0,1,"23456",129
^SLCC:
^SLCC:
1,0,1,0,0,0,''1234567'',129,''Called
Party''
^SLCC: 2,0,2,0,0,1,"23456",129
^SLCC:
^SLCC:
1,0,1,0,0,0,''1234567'',129,''Called
Party''
^SLCC: 2,0,3,0,0,1,"23456",129
^SLCC:
^SLCC:
1,0,0,0,0,1,''1234567'',129,''Called
Party''
^SLCC:
NO CARRIER
^SLCC:
NO CARRIER
EXAMPLE 2
^SLCC: 1,1,4,0,0,1,''1234567'',129
^SLCC:
RING
^SLCC: 1,1,4,0,0,1,''1234567'',129
MC55_ATC_V04.00
Confidential / Released
MO call starts, paging B-party
End of current list
Traffic channel established,
network may now transmit network announcements,
ME may now transmit DTMF tones.
End of current list
Call is now ringing at B-Party
End of current list
B-Party has accepted the call, connection estab-
lished
End of current list
We start a second voice call.
''OK'' response is issued immediately because
another call is already active (cf. ATD)
The active call is automatically put on hold, triggering
the display of the list
The second call has already started before the indi-
cation for the held call could be displayed
End of current list
The identical list is displayed again, triggered by the
start of the second voice call
The status of the second list entry has already been
displayed with the previous URC
End of current list
The held call doesn't change status right now
The second call is now alerting the B-Party
End of current list
The held call doesn't change status right now
End of current list: the B-Party of the second call has
not accepted the call in time, the second call has
ended.
The second call has ended
list is now empty: B-Party has ended the first call
The first call has ended
Incoming call is signalled.
Display is triggered by the incoming call, but the cur-
rent status of the call at the time of display already
comprises an active traffic channel.
End of current list
Incoming call is signalled.
The incoming call had a traffic channel assigned
from the start.
This second identical display is triggered by the traf-
fic channel assignment.
Since the traffic channel was already indicated in the
previous URC, both instances of the URC contain
identical information.
Page 153 of 475
3/17/06

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brodersen mc55

Table of Contents