Table of Contents
Advertisement
Return-Path: <subscriber1@testdomain.com>
X-Original-To: subscriber1@testdomain.com
Delivered-To: subscriber2@testdomain.com
Received: from 10.10.0.132 (unknown [10.10.0.132])
by testdomain.com (Postfix) with SMTP id 379321D004
for <subscriber1@testdomain.com>; Tue, 20 Dec 2005 08:00:07 +0100 (CET)
To: subscriber2@testdomain.com
Cc:
From: subscriber1@testdomain.com
Subject: TestMail
Message-Id: <20051220070007.379321D004@testdomain.com >
Date: Tue, 20 Dec 2005 08:00:07 +0100 (CET)
X-UIDL: &lL"!(Z6"!^cl!!1+%"!
Status: RO
Hallo Tom!Bye Bye Tom!
.
OK
at^sisr=1,1000
^SISR: 1,-2
OK
at^sisi=1
^SISI: 1,6,578,0,0,0
OK
at^sise=1
^SISE: 1,0
OK
at^sisc=1
OK
10.11.14
HTTP POST (Polling Mode)
at^siss=1,srvType,"Http"
OK
at^siss=1,conId,1
OK
at^siss=1,hcMethod,1
OK
at^siss=1,address,"http://192.168.1.3/datafiles/dummy/dummy.txt"
OK
at^siss=1,hcContLen,180
OK
at^siso=1
OK
at^sisw=1,100
^SISW: 1, 100, 0
OK
at^sisw=1,100
^SISW: 1, 80, 0
OK
at^sisw=1,40
^SISW: 1, 0, 0
OK
MC55_ATC_V04.00
Confidential / Released
Dot indicates end of mail according to RFC 2821.
Try to read 1000 bytes once again.
No more data available to read, i.e. the service has
finished.
Check the connection state of service profile 1.
The command response indicates that the POP3
service is in state "6" (Down) and that 578 bytes have
been retrieved.
Check error status of service profile 1.
The command response confirms that no error
occurred.
Close the service.
Select service type HTTP.
Select connection profile 1.
Select "Post" method.
Try to upload 180 bytes.
Open the service.
Send the first 100 bytes.
Try to send again 100 bytes.
80 bytes are sent.
Try to write data once again.
No further data available, i.e. the service has fin-
ished.
Page 264 of 475
3/17/06
Advertisement
Table of Contents
