Table of Contents
Advertisement
(num)
<BSIC>
Base station identity code
2 digits, e.g. 32
00
(num)
<chann>
ARFCN (Absolute Frequency Channel Number)
0
(num)
<RSSI>
Received signal level of the BCCH carrier (0..63). The indicated value is composed of the measured value in
dBm plus an offset. This is in accordance with a formula specified in 3GPP TS 05.08
(num)
<C1>
Coefficient for base station reselection, e.g. 30. In dedicated mode, under certain conditions the parameter can-
not be updated. In such cases a '-' is presented.
(num)
<C2>
Coefficient for base station reselection, e.g. 30. In dedicated mode, under certain conditions the parameter can-
not be updated. In such cases a '-' is presented.
Note
•
To some extent, the cell monitoring commands AT^MONI,
eters. The receiving level, for example, can be queried with all three commands. Yet the resulting values may
be slightly different, even though obtained over a time period of a few seconds. This is quite normal and noth-
ing to worry about, as the cell information is permanently updated.
MC55_ATC_V04.00
Confidential / Released
Not decoded
Not decoded. In this case, all remaining parameters related to the same chan-
nel are neither decoded. For example, a non-existing cell appears as follows:
000,000,0000,0000,00,0,0,-,-
Page 173 of 475
and
AT^MONP
AT^SMONC
cover the same param-
3/17/06
Advertisement
Table of Contents
