Table of Contents
Advertisement
•
Message Length in Text Mode
The maximum length of a short message depends on the used coding scheme: It is 160 characters if the 7
bit GSM coding scheme is used, and 140 characters according to the 8 bit GSM coding scheme.
In case UCS2 character set selected it is highly recommended to set Data Coding Scheme
AT+CSMP) to 16-bit data, otherwise the length of sms user data is restricted to 88 octets. Even better for mes-
sages with UCS2 character set is the PDU Mode.
•
At baudrates lower than 19200 it is recommended to use the line termination character only (refer to
ATS3, default
) before entering text or PDU. Use of the line termination character followed by the
<CR>
response formatting character (see
MC55_ATC_V04.00
Confidential / Released
of ATS4, default
<n>
<LF>
Page 343 of 475
) can cause problems.
(<dcs>
of
of
<n>
3/17/06
Advertisement
Table of Contents
