Table of Contents
Advertisement
"IR"
"AB"
"AG"
"AC"
<password length>
4...8
(str)
<old password>
Password specified for the facility.
Parameter
<old password>
Take into account that a password may have already been set by factory, or that the service is subject to a pass-
word issued by the provider. See notes above or contact provider.
(str)
<new password>
New password. Mandatory, if
Note
•
When changing PIN2 (<facility>="P2") it is recommended to check the new state of PIN2 by using the
command.
AT+CPIN2
Examples
EXAMPLE 1
To change PIN2
AT+CPWD="P2","0000","8888"
OK
EXAMPLE 2
To set password used to enable or disable barring of all outgoing calls:
AT+CPWD="AO","0000","3333"
OK
EXAMPLE 3
Handling of the "PS" lock password
AT+CMEE=2
AT+CPWD="PS","1111","2222"
OK
AT+CPWD="PS","1111","2222"
+CME ERROR: incorrect password
MC55_ATC_V04.00
Confidential / Released
BIC-Roam (Bar Incoming Calls when Roaming outside the home country)
All Barring services
All outGoing barring services
All inComing barring services
(num)
Length of password. The range of permitted length for a password depends on
the associated <facility>. It is available from the test command response,
or in the description of parameter <facility>.
can be ignored if no old password was allocated to the facility.
<old password>
Page 117 of 475
was an unblocking key (such as the Master Phone Code).
(where "0000" = old PIN2 and "8888" = new PIN2)
PIN2 Password has been changed to "8888"
Requests the network to change the password for
supplementary service "call barring".
Usually this request will affect all barring services,
even though the request is issued for Supplementary
Service BAOC ("Barring of all outgoing calls") only.
Refer to the respective network provider for detail.
Enable text output of CME Error information
(where "1111" = old password and "2222" = new
password)
Password for facility "PS" is now "2222"
Repeat command to provoke error "incorrect pass-
word"
("1111" is no longer the correct password)
3/17/06
Advertisement
Table of Contents
