Siemens Brodersen MC55 AT Command Manual page 118

EXAMPLE 4
To specify a new "PS" lock password, after the old password was disabled (e.g. after three failed attempts to
change the "PS" password): use the master phone code.
CAUTION: THIS TEST SHOULD BE PERFORMED ONLY IF THE CORRECT MASTER PHONE CODE FOR
THE INDIVIDUAL ME USED IS DEFINITELY AVAILABLE! Otherwise the module used will be rendered use-
less until the correct master phone code is entered!:
AT+CPWD="PS","12345678","1111"
OK
Alternatively, without giving a new password:
AT+CPWD="PS","12345678"
OK
MC55_ATC_V04.00
Confidential / Released
where 12345678 is the Master Phone Code and
1111 is the new password. You may also use
password>
word.
(where 12345678 is the Master Phone Code). Deac-
tivates the present phone lock.
Page 118 of 475
to restore the former disabled pass-
<new
3/17/06