13.19
AT^SMGL List Short Messages from preferred store without set-
ting status to REC READ
The write command allows to select a status type and lists, from the message storage <mem1>, all messages
that currently have the specified <stat>. The major difference over the standard command
status of the listed messages remains u n c h a n g e d (unread remains unread).
The execute command is the same as the write command, but uses the given default of <stat>.
Syntax
Test Command
AT^SMGL=?
Response(s)
same as
AT+CMGL
Exec Command
AT^SMGL
Response(s)
^SMGL: (For default values of <stat>, see "Section 13.1,
OK
Write Command
AT^SMGL=<stat>
Response(s)
same as
AT+CMGL
Reference(s)
SIEMENS
Notes
•
The selected
<mem1>
TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types.
TE application can recognize the response format by examining the third response parameter.
•
Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 20.1,
Restricted access to SIM data after SIM PIN authentication
MC55_ATC_V04.00
Confidential / Released
can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA-
Page 361 of 475
SMS
parameters.)
PIN
ASC0 ASC1
MUX1
%
%
%
%
is that the
AT+CMGL
MUX2
MUX3 Charge
%
%
!
!
for further detail.
Last
!
3/17/06