Table of Contents
Advertisement
hcUsrAgent
hcMethod
hcProp
hcRedir
hcAuth
smFrom
smRcpt
smCC
smSubj
smHdr
smAuth
MC55_ATC_V04.00
Confidential / Released
the serial interface, the HTTP client will go from service state "Up" to service
state "Closing" (see parameters
Finally, the URC "^SISW: x, 2" indicates that all data have been transferred and
the service can be closed with AT^SISC.
The user agent string must be set by the application to identify the mobile. Usu-
ally operation system and software version info is set with this browser identi-
fier.
Length: 0 ... 63
HTTP method specification: 0=GET, 1=POST, 2=HEAD.
Parameter for several HTTP settings.
Length: 0 ... 127
The general format is 'key': <space> 'value' "\0d\0a".
Multiple settings can be given separated by "\0d\0a" sequences within the
string.
Possible 'key' values are defined at HTTP/1.1 Standard RFC 2616.
This flag controls the redirection mechanism of the MC55 acting as HTTP client
(numeric).
If "hcRedir" = 0: No redirection.
If "hcRedir" = 1: The client automatically sends a new HTTP request if the
server answers with a redirect code (range 30x).
Default is 1.
If set ("hcAuth" = 1) this flag determines that the HTTP client will automatically
answer on authentication requests from the server with the current "passwd"
and "user" parameter settings. If these parameters are not specified the MC55
will terminate the HTTP connection and send an indication to the TA.
Default is 1.
Email sender address, i.e. "MAIL FROM" address (string).
Length: 6 ... 256
A valid address parameter consists of local part and domain name delimited by
a '@' character, e.g. "john.smith@somedomain.de".
Recipient address of the email, i.e. "RCPT TO" address (string).
Length: 6 ... 256
If multiple recipient addresses are to be supplied the comma character is used
as delimiter to separate individual address values, e.g. "john.smith@somedo-
main.de,tom.meier@somedomain.de".
CC recipient address of the email (string).
Length: 6 ... 256
If multiple CC recipient addresses are to be supplied the comma character is
used
as
delimiter
"john.smith@somedomain.de,tom.meier@somedomain.de".
Subject content of the email (string).
Length: 0 ... 256
If no subject is supplied the email will be sent with an empty subject.
This parameter, if set, will be appended at the end of the email header section
(string).
Length: 0... 256
Hence, it serves as a generic header field parameter which allows the user to
provide any email header field. It is the user's responsibility to provide correct
header fields!
String of max. 256 characters.
Example for multipart MIME messages:
"Content-Type: multipart/mixed".
SMTP authentication control flag (numeric).
If disabled
(<srvParmValue>
SMTP authentication.
If enabled
(<srvParmValue>
server will be performed by means of supported authentication methods, using
Page 233 of 475
and
<srvState>
to
separate
individual
"0" by default), MC55 performs action without
"1") authentication procedure with the SMTP
for detail).
<srvState>
address
values,
e.g.
3/17/06
Advertisement
Table of Contents
