Siemens Brodersen MC55 AT Command Manual page 238

Parameter Description
(num)
<srvProfileId>
Internet service profile identifier as defined by
0...9
(num)
<srvState>
Internet service state (for details see
2
3
4
5
6
(num)
<rxCount>
Number of bytes received via
This is the same value as displayed by the
(num)
<txCount>
Number of bytes sent via
This is the same value as displayed by the
(num)
<ackData>
Number of data bytes already sent and acknowledged at TCP layer. Value 0 indicates that no sent data is
acknowledged yet.
Parameter is not applicable to HTTP, POP3, SMTP and Socket UDP client. For these services the counter is
always set to 0.
(num)
<unackData>
Number of data bytes already sent but not yet acknowledged at TCP layer. A value 0 indicates that all sent data
is already acknowledged.
This is the same value as displayed in the response of the
<unackData>.
Parameter is not applicable to HTTP, POP3, SMTP and Socket UDP client. For these services the counter is
always set to 0.
Note
• If a service is in state "Down" the responses for <rxCount>, <txCount>,
are the last known values for the service in the states "Connecting", "Up" and "Closing".
MC55_ATC_V04.00
Confidential / Released
AT^SISS
parameter <srvState>).
AT^SISO
Allocated
Connecting
Up
Closing
Down
since last successful
AT^SISR
AT^SISO
since last successful
AT^SISW
AT^SISO
Page 238 of 475
(<srvProfileId>).
write command.
AT^SISO
read command with the parameter <rxCount>.
write command.
AT^SISO
read command with the parameter <txCount>.
write command with the parameter
AT^SISW
and
<ackData> <unackData>
3/17/06