Siemens Brodersen MC55 AT Command Manual page 394

Notes
• The command can be used for the phonebooks "SM", "FD", "ME" (cf. AT+CPBS).
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 20.1, Restricted access to SIM data after SIM PIN authentication
Examples
EXAMPLE 1
Using without <RealLocReq>:
AT^SPBG
AT^SPBG=?
^SPBG: (1-33),20,17
AT^SPBG=1,33
^SPBG:1,"+999999",145,"Arthur"
^SPBG:2,"+777777",145,"Bill"
^SPBG:3,"+888888",145,"Charlie"
......................
The numbers at the beginning of each line are not the memory locations in the phonebook, but only serial
numbers assigned to the entries' positions in the alphabetical list.
EXAMPLE 2
Using with <RealLocReq>:
AT^SPBG
AT^SPBG=?
^SPBG: (1-33),20,17
AT^SPBG=1,33,1
^SPBG:1,"+999999",145,"Arthur",27
^SPBG:2,"+777777",145,"Bill",6
^SPBG:3,"+888888",145,"Charlie",15
......................
The numbers at the end of each line are the memory locations in the phonebook and can be used for dialing
or editing phonebook entries:
AT+CPBR=27
+CPBR: 27,"+999999",145,"Arthur"
MC55_ATC_V04.00
Confidential / Released
First run the
range of entries stored in the current phonebook.
TA returns the range, where 33 is the number of
entries stored in the current phonebook.
Now, enter the write command. To obtain best
results it is recommended to query the full range of
entries. TA returns phonebook entries in alphabetical
order.
First run the
range of entries stored in the current phonebook.
TA returns the range, where 33 is the number of
entries stored in the current phonebook.
Now, enter the write command including parameter
<RealLocReq>=1 to get the actual location num-
bers.
Read out phonebook location 27.
This entry can be edited with
dialing with ATD><mem><n>.
Page 394 of 475
for further detail.
test command to find out the
AT^SPBG
test command to find out the
AT^SPBG
AT+CPBW
or used for
3/17/06