Mechanical installation
Street cabinet mounting (with fan unit)
The 1643 AM unit can be mounted in an outdoor street cabinet in conjunction with an
AnyMedia Access System. In that case, a fan unit containing two fans must be
mounted to the side of the 1643 AM unit. Proceed as follows to mount the 1643 AM
unit into a street cabinet:
...................................................................................................................................................................................................
Unscrew the six M3x3 screws which are pre-screwed on the right side of the 1643 AM
1
unit.
...................................................................................................................................................................................................
Place the fan unit with its slotted holes over the screw heads.
2
Important! Pay attention to the correct orientation (see
unit" (p.
AM unit than the power interface.
...................................................................................................................................................................................................
Shift the fan unit until it cannot be moved any longer.
3
...................................................................................................................................................................................................
Fix the screws through the fan unit holes.
4
...................................................................................................................................................................................................
Fix the brackets to the fan unit with four M3x8 screws.
5
...................................................................................................................................................................................................
Mount the 1643 AM unit to the rack with four hexagon bolts M6x16.
6
NOTE: The connectors of both units (fan and unit) must show to the front.
E
N D
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
3-18)). The alarm and LED interface must be located closer to the 1643
O F
S T E P S
Alcatel-Lucent - Proprietary
See notice on first page
AM unit installation
Figure 3-13, "Mounted fan
3-17