Alcatel-Lucent 1643 AMS Installation Manual page 189

ITM-CIT installation and NE provisioning
Result:
E
N D
...................................................................................................................................................................................................
Parameters
NE type
The NE type is indicated.
NE name
The NE's name is listed. The name must be unique across management domains. If the
NE is not managed by the ITM-NM, then the name may be up to 20 characters in
length. If the NE will be managed by the ITM-NM, then the name must be 3 to 10
characters long with the last three characters a slash and two digits. Only A-Z, 0-9, _, /,
and - are permitted for NEs managed by the ITM-NM. An example of an ITM-NM
compatible name is "LONDON/02".
NE location
The location of the NE is given. The location may have up to 20 uppercase or
lowercase characters, digits, and spaces.
MIB state
The status of the MIB is indicated. The possible values are described in the table
below.
MIB state
Empty
Filled
Filled Unknown
Filled Not
Confirmed
Waiting for Upload
....................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
The Node Details window disappears.
O F S T E P S
Description
An empty System Controller (SC) has been inserted or the MIB
was cleared after starting an MIB download automatically by
the management system. If the MIB state is empty, the
management system can proceed with the MIB download.
The NE possesses a valid MIB which has been confirmed.
The NE has a MIB, however, it is of unknown validity. This
can occur, for instance, if one SC is replaced by another SC
having a MIB.
The NE has a MIB, however, it has not yet been confirmed by
the ITM-CIT or OMS. The procedure
MIB" (p. 6-22)
Once confirmed, the state will become Filled.
This state is only possible when the NE is managed by the
OMS. After confirmation of the MIB, the NE performs a reset
and loses its association with the OMS. When the NE restarts,
the MIB state becomes Waiting for Upload. When the OMS
reassociates with the NE and detects this MIB state, a MIB
upload is performed, and the state will then become Filled.
Alcatel-Lucent - Proprietary
gives the steps necessary to confirm the MIB.
See notice on first page
Confirm/Update the MIB
"Confirm/Update the
6-23