Alcatel-Lucent 1643 AMS Installation Manual page 140

System cabling
LAN interfaces (X4IP, X8PL and X5IP card)
...................................................................................................................................................................................................................................
Purpose
Ethernet LAN cables (10/100/1000Base-T) can be connected to these interfaces.
Connector data
The LAN connectors which are located on the X4IP, X8PL and X5IP option cards are
8-pin RJ45 connectors with metal shell for grounding.
Figure 4-42 LAN connector
Table 4-14
Point on Connector
Cable data - GE
The following figure displays the cable desgin for the Gigabit Ethernet (GE) LAN
cable. As GE interfaces are bidirectional, the MDI wiring conforms to the IEEE
802.3-2002 standard. Based on this standard, the MDI-X (cross-over) functions for
bidirectional GE interfaces are not compatible with the MDI-X functions for E/FE
interfaces.
The following figure displays the MDI connector for MDI-X functions and is denoted
with the symbol 'X'.
...................................................................................................................................................................................................................................
4-42
Pin assignment (LAN cables - E/FE)
1 TX P
2 TX N
3 RX P
4 nc
5 nc
6 RX N
7 nc
8 nc
Alcatel-Lucent - Proprietary
See notice on first page
Signal Name
Transmit-data positive
Transmit-data negative
Receive-data positive
Not connected
Not connected
Receive-data negative
Not connected
Not connected
Description
365-312-802R7.2
Issue 4, June 2007