Snmp Trap Settings Display - Omron Sysmac NJ-series User Manual

5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
5-6

SNMP Trap Settings Display

 SNMP Trap
Setting
SNMP trap
*1
Port No.
*1 The following ports are used by the system and cannot be set by the user: 25, 53, 68, 110, 2222, 2223, 2224,
9600, and 44818.
Additional Information
Refer to 13-1-1 Overview for details on the SNMP trap.
5-12
Description
Specify whether to use the SNMP trap (network error detec-
tion). If the SNMP trap service is not used, SNMP traps are not
sent to the SNMP manager.
Set the port number to use to connect to the SNMP server. It is
normally not necessary to change this setting.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Default
Do not use.
162