13 SNMP Agent
Subtree name
ipAdEn-
tReasmMax-
Size
ipRouteTable
ipRouteEntry
ipRouteDest
ipRouteIfIndex
ipRouteMetric1
ipRouteMetric2
ipRouteMetric3
ipRouteMetric4
ipRouteNext
Hop
ipRouteType
13-12
Standard [(identifier) attribute]
(5) RO
The maximum IP packet size that can be reas-
sembled from IP fragmented input IP datagrams
received through the interface.
(21) NA
The IP routing table for this entity.
(1) NA
Route information for a specific destination.
The index is ipRouteDest.
(1) RW
The destination IP address for this route. A value
of 0.0.0.0 for this entry indicates the default route.
(2) RW
The ID number of the interface required to send to
the next destination host in this route. This ID
number is the same number as ifIndex, which is
used to identify the interface.
(3) RW
The primary routing metric for this route. This
value is determined based on the protocol speci-
fied in ipRouteProto. Set to -1 if you do not want to
use this metric (this is also the same for ipRoute-
Metric 2 through 4).
(4) RW
The alternative routing metric for this route.
(5) RW
The alternative routing metric for this route.
(6) RW
The alternative routing metric for this route.
(7) RW
The IP address of the next hop in this route (for
routes connected by a broadcast or media, this is
the agent address or address of that interface).
(8) RW
The type of route.
Other (1): Not any of the following types.
Invalid (2): An invalid route.
Direct (3): A direct connection.
Indirect (4): An indirect connection (not con-
nected to LOCAL).
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Implementation
Support
specifications
Sup-
According to the
ported.
standard.
---
---
---
---
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.