Clearing Settings - Omron H8PS Manual

Clearing Settings

Clearing All Programs
The all clear function can be used to delete all cam programs, the
settings for advance angle compensation function, and all other
settings. All settings in the Function Setting Mode will be returned to
their default settings.
Mode
PRGM
TEST
RUN
Initial Display
PRG
CAM STEP
Press the
PRG
STEP
CAM
Press the
Key
CLEAR
PRG
Set the mode switch to PRGM or TEST.
Key for 3 s min.
CLEAR
Confirm that clr flashes on the display.
Key.
WRITE
After the completion of all clear
processing, the screen displays end for
approximately one second and then
resume the previously displayed screen.
If the Key is pressed again before
CLEAR
pressing the Key, the settings will
WRITE
not be deleted and the previous display
will be resumed.
Clearing Individual Steps, Cams, and Banks
ON/OFF angle settings can be deleted by step, by cam, or by bank. If
settings are deleted by cam, the settings for the advance angle
compensation (ADV) function will not be deleted. If settings are
deleted by bank, the settings for the ADV function will also be
deleted. Settings in the Function Setting Mode will not be deleted.
Mode
PRGM
TEST
RUN
Initial Display
PRG
CAM STEP
Press the
Screens for Individually Clearing Items
PRG
CAM STEP
PRG
CAM STEP
PRG
STEP
CAM
Press the
Key.
CLEAR
PRG
Cam Positioner
Set the mode switch to PRGM or TEST.
Key.
CLEAR
Deleting Settings by Step
Press the STEP Keys
to specify the step to be
deleted.
Deleting Settings by Cams
Press the CAM Keys to
specify the cam to be
deleted.
Deleting Settings by Banks
Press the Key to
BANK
specify the bank to be
deleted.
Key.
WRITE
After the completion of all clear
processing, the screen displays end for
approximately one second and then
resume the previously displayed screen.
If the Key is pressed again before
CLEAR
pressing the Key, the settings will
WRITE
not be deleted and the previous display
will be resumed.
H8PS
25