Creating Tags And Tag Sets - Omron Sysmac NJ-series User Manual

Machine automation controller cpu unit built-in ethernet/iptm port
Hide thumbs Also See for Sysmac NJ-series:
Table of Contents

Advertisement

7-2-4

Creating Tags and Tag Sets

You must create the tag sets and set member tags required to create connections for a registered Eth-
erNet/IP Unit. You can set the network variables used in control programs for tags.
This section first describes the basic procedure to create tags and tag sets (1, below). Then it explains
how to import variables with a Network Publish attribute from the Sysmac Studio to the Network Config-
urator (2, below).
Then it explains how to effectively use network variables for tags.
(1) Creating Tags and Tag Sets with the Network Configurator's Device Parameter Edit-
ing Function
(2) Importing Variables with a Network Publish Attribute Created in the Sysmac Studio
to the Network Configurator
(1) Creating Tags and Tag Sets with the Network Configurator's
Device Parameter Editing Function
 Creating a Tag Set
1
Double-click the icon of the device for which to create a tag set to display the Edit Device
Parameters Dialog Box. Right-click the icon to display the pop-up menu, and select Parameter
– Edit.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
7 Tag Data Link Functions
7
7-23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sysmac nx-seriesSysmac nx1p2-10 seriesSysmac nx1p2-90 seriesSysmac nj501-5 seriesSysmac nj501-4 seriesSysmac nj501-3 series ... Show all

Table of Contents