Omron Sysmac NJ-series User Manual page 40

1 Introduction
Service
Used by system, other
FTP client control port
NTP client
SNMP agent
SNMP trap
*8 A CPU Unit with unit version 1.01 or later and Sysmac Studio version 1.02 or higher are required to use CPU
routing.
1-10
Protocol Port number
TCP/UDP 9600
TCP 21
UDP 123
UDP 161
UDP 162
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Remarks
You can change the port number in
the Unit Settings on the Sysmac
Studio.