Saving Power - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Note:
Typically, print outs and photos fade over time (color
distortion) due to the effects of light and various
constituents in the air. This also applies to Epson special
media. However, with the correct storage method, the
degree of color distortion can be minimized.
❏ See the documentation supplied with Epson special
media for detailed information on handling the
paper after printing.
❏ The colors of photos, posters, and other printed
materials appear different under different lighting
conditions (light sources
from this printer may also appear different under
different light sources.
* Light sources include sunlight, fluorescent light,
incandescent light, and other types.

Saving Power

The printer enters sleep mode or turns off
automatically if no operations are performed for a set
period. You can adjust the time before power
management is applied. Any increase will affect the
product's energy efficiency. Please consider the
environment before making any change.
Sleep mode
The printer enters sleep mode when there are no
errors, no print jobs being received, and no control
panel or other operations performed. When the
printer enters sleep mode, the control panel's screen
turns off and the internal motors and other parts
switch off to consume less power.
Sleep mode is exited if a print job is received or the
screen of the control panel is touched.
The delay before the printer enters sleep mode can be
selected from values between 1 and 210 minutes. At
default settings, the printer enters sleep mode if no
operations are performed for 15 minutes. The delay
can be changed from the Basic Settings menu.
"General Settings - Basic Settings" on page 120
U
Note:
When the printer enters sleep mode, the control panel's
screen goes blank as if the power has been turned off,
but the P light remains lit.
Introduction
*
). The colors of print outs
User's Guide
Power Off Timer
This function automatically turns the printer off if no
errors occur, no print jobs are received, and no control
panel or other operations are performed for a set
period of time.
The default setting differs as follows depending on the
model.
❏ SC-T5400/SC-T3400/SC-T3400N/SC-T5480/
SC-T3480N
Set to 8h.
❏ SC-T5460/SC-T3460/SC-T3460N/SC-T5430/
SC-T3430
Set to Off.
Power Off Timer settings can be changed from the
Basic Settings menu.
"General Settings - Basic Settings" on page 120
U
20