Replacing Maintenance Box - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Replacing Maintenance
Box
If The Maintenance Box is at the end of its service
life. is displayed, replace the Maintenance Box.
If The Maintenance Box is nearing the end of its
service life. is displayed, ready a new Maintenance
Box. Printing is possible until replacement is
instructed.
Supported maintenance box U
Consumable Products" on page 169
c
Important:
Do not replace the Maintenance Box while
printing. Waste ink may leak.
Note:
You can replace the Maintenance Box while viewing the
procedure on the screen. To see the guide, from the
Home screen, touch Settings - Maintenance - Replace
Maintenance Box.
When you open the Maintenance Box cover for
SC-T5400 Series, you will find a Maintenance Box on
both the left and right sides. The replacement
procedure is the same for both of them.
User's Guide
Replacing Consumables
"Options and
146
A
Open the Maintenance Box cover.
B
Pull out the Maintenance Box.
C
Place the used Maintenance Box in the clear
bag included with the new Maintenance Box,
and make sure that the zipper is closed tight.
c
Important:
Until the fastener is closed securely, do not tilt
the Maintenance Box. Waste ink may leak.