Epson SC-T5400 Series User Manual page 68

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
E
Check other settings, and then start printing.
Settings in Mac
A
Open the Print screen and select the paper size
from the Paper Size option, and then select a
borderless printing method.
"Basic Operating Procedures (Mac)" on
U
page 50
The selections for borderless printing methods
are displayed as shown below.
xxxx (Roll Paper - Borderless, Auto Expand)
xxxx (Roll Paper - Borderless, Retain Size)
xxxx (Roll Paper - Borderless, Banner)
xxxx (Sheet - Borderless, Auto Expand)
xxxx (Sheet - Borderless, Retain Size)
Paper size such as A4 will be displayed in xxxx.
Note:
If page setting options are not available in the
application's print dialog, display the page settings
dialog.
B
If Auto Expand is selected for paper size, select
Advanced from the list, and click Expansion.
You can only select Expansion if Auto Expand
is selected in Paper Size. The expansion values
for each of the settings are as follows.
Max : 3 mm for left and 5 mm for right
(the image shifts 1 mm to the
right)
Printing with the Printer Driver from Your Computer
User's Guide
Standard : 3 mm for left and right
Min : 1.5mm for left and right
Note:
Moving the slider towards Min decreases the
image enlargement ratio. Therefore, some margins
may appear at the edges of the paper depending
on the paper and printing environment.
C
When printing on roll paper, select Advanced
from the list, and choose an Auto Cut option.
D
Check other settings, and then start printing.
68