SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
c
Important:
❏ Printing is distorted when the trailing edge of
the roll paper comes off the core. Make sure the
trailing edge does not come inside the printing
area.
❏ If the print range settings width
than the print data width
sections beyond the printable width
not be printed.
Cut Sheet
When printing borderless at the left and right, the left
and right margins will be 0 mm.
The gray area in the illustration below shows the
printable area. The arrow in the illustration indicates
the direction that the paper is ejected.
*1
SC-T5400 Series
*2
SC-T3400 Series/SC-T3400N Series
*3
The top and bottom margins vary depending on
the print quality setting (Speed, Fine, etc.).
User's Guide
Appendix
is smaller
, then the
will
179