Loading And Setting The Paper; Notes On Loading The Paper; Paper Load Position - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Loading and Setting
the Paper
Notes on Loading the
Paper
Caution:
Do not rub the edges of the paper with your hands.
The edges of the paper are thin and sharp and
could cause an injury.
Do not load roll paper with the right and left edges
uneven
Loading roll paper with the right and left edges
uneven may cause paper feeding problems or paper
meandering may occur during printing. Rewind the
paper to make the edges even before using roll paper
or use roll paper with no problem.
Do not load curled paper
Loading curled paper may cause paper jams or soiled
prints. Flatten the paper before use by bending it in
the opposite way or use paper with no problem.
Unsupported paper
Do not use paper that is wavy, torn, cut, folded, too
thick, too thin, has a sticker affixed, etc. Doing so may
cause paper jams or soiled prints. See the following for
paper supported by the printer.
"Epson Special Media Table" on page 171
U
"Supported Commercially Available Paper" on
U
page 175
User's Guide

Loading and Setting the Paper

Paper Load Position

Roll paper and cut sheets can be loaded. See the
following for more details on the paper that can be
used with the printer.
"Supported Media" on page 171
U
Roll Paper
Roll paper from 254 mm to the maximum printable
width can be loaded.
Cut Sheet(1 sheet)
One sheet of cut paper from A4 to the maximum
printable width can be loaded.
27