Epson SC-T5400 Series User Manual page 108

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Settings item
Network Settings (Details of each item U
Wi-Fi Setup
Router
Connect via Wi-Fi
Wi-Fi Setup Wizard
Push Button Setup(WPS)
Others
PIN Code Setup(WPS)
Wi-Fi Auto Connect
Disable Wi-Fi
Wi-Fi Direct
Wi-Fi Direct
Change Password
Disable Wi-Fi Direct
Delete Registered Device
Wired LAN Setup
Network Status
Wired LAN/Wi-Fi Status
Wi-Fi Direct Status
Print Status Sheet
Connection Check
Advanced
Device Name
TCP/IP
Proxy Server
IPv6 Address
Link Speed & Duplex
Redirect HTTP to HTTPS
Disable IPsec/IP Filtering
Disable IEEE802.1X
User's Guide
Using the Menu
Settings value
"General Settings - Network Settings" on page
When wireless LAN connection disabled: Display Connect via Wi-Fi
menu
When wireless LAN connection connected: Display connection
status and settings information
When Wi-Fi Direct disabled: Display Wi-Fi Direct wizard
When Wi-Fi Direct enabled: Display settings information and
number of connected devices
Start Setup
(Displayed when connected to a wireless LAN.)
Display current connection settings
Print
Start network connection check
Display settings change screen
Enable, Disable
Auto, 10BASE-T Half Duplex, 10BASE-T Full Duplex, 100BASE-TX Half
Duplex, 100BASE-TX Full Duplex
Enable, Disable
Proceed
(Displayed when enabled.)
108
134)