Epson SC-T5400 Series User Manual page 136

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Settings item
Device Name
TCP/IP
Proxy Server
IPv6 Address
Link Speed & Duplex
Redirect HTTP to
HTTPS
Disable IPsec/IP Fil‐
tering
Disable IEEE802.1X
Using the Menu
Settings value
*
Auto
Manual
Use
*
Do Not Use
*
Enable
Disable
*
Auto
10BASE-T Half Duplex
10BASE-T Full Duplex
100BASE-TX Half Duplex
100BASE-TX Full Duplex
*
Enable
Disable
Enable
*
Disable
Enable
*
Disable
User's Guide
Explanation
Set the name of the printer to use on the network.
Automatically assign the printer IP address using DHCP
functionality in the router.
Select this to manually assign a fixed IP address, then input the IP
address, subnet mask, and other required information. For details,
see the Administrator's Guide.
When using a proxy server to directly connect from the intranet to
the Internet so that the printer may directly access the Internet for
firmware updates or similar, select Use, and set the server name and
port number.
Select whether to enable or disable the IPv6 function.
Normally, set this to Auto.
Select whether to enable or disable the function to auto-redirect
HTTP to HTTPS.
To enable IPsec/IP filtering functionality, use Web Config. For details,
see the Administrator's Guide.
To enable IEEE802.1X functionality, use Web Config. For details, see
the Administrator's Guide.
136