Epson SC-T5400 Series User Manual page 142

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Settings item
Bidirectional
Using the Menu
Settings value
Oversize
Borderless
*
On
Off
User's Guide
Explanation
Add margins (areas of in the following illustration) outside the
output size (areas of in the following illustration) set in the
Reduce/Enlarge settings. With the actual output size, the margin
sections become larger than the set output size (areas of
following illustration).
This is enabled when Roll Paper is selected in Paper Source.
The print data is enlarged slightly in respect to the output size set
in Reduce/Enlarge to print so that margins do not appear inside the
output size. However, if a custom size is set, a margin may appear
on the right side depending on the data.
When printing multiple pages with borderless printing on roll
paper, you can select whether to insert a margin and cut twice
between pages or cut once between pages in the following menu
item.
Settings - General Settings - Printer Settings - Paper Source
Settings - Roll Paper Setup - Cut for Borderless Print
Setting this to On will cause the print head to print while moving
both left and right. Setting this to Off will reduce the ruled line
misalignment, but printing will take more time.
142
in the