Epson SC-T5400 Series User Manual page 29

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
C
Pull off the transparent flange from the spindle.
D
Attach or remove the attachments in
accordance with the roll core size of the roll
paper.
2 inch roll core
The attachments are not required. Remove the
attachments from the flanges if they have been
attached to the flanges.
Push the two tabs on the flange outwards to
remove the attachment.
After you remove the attachment from the
black flange, remove the attachment from the
spindle.
User's Guide
Loading and Setting the Paper
E
F
29
3 inch roll core
Attach the attachments to the both flanges.
Align the triangle marks on the flange with
those on the attachment, and push in until the
tabs are secured.
Place the roll paper on a flat surface and then
insert the spindle.
With the black flange is on the right, orient the
roll paper so that the leading edge is as shown
in the figure below.
Push the flange to the roll paper until there is
no gap between the flange and roll paper.