Saving Power - Epson SC-P5300 Series User Manual

SC-P5300 Series User's Guide
Note:
Typically, print outs and photos fade over time (color
distortion) due to the effects of light and various
constituents in the air. This also applies to Epson special
media. However, with the correct storage method, the
degree of color distortion can be minimized.
❏ See the documentation supplied with Epson special
media for detailed information on handling the
paper after printing.
❏ The colors of photos, posters, and other printed
materials appear different under different lighting
conditions (light sources
from this printer may also appear different under
different light sources.
* Light sources include sunlight, fluorescent light,
incandescent light, and other types.

Saving Power

The printer enters sleep mode or turns off
automatically if no operations are performed for a set
period. You can adjust the time before power
management is applied.
Any increase will affect the product's energy efficiency.
Please consider the environment before making any
changes.
Sleep mode
The printer enters sleep mode when there are no
errors, no print jobs being received, and no control
panel or other operations performed. When the
printer enters sleep mode, the control panel's screen
turns off and the internal motors and other parts
switch off to consume less power.
Sleep mode is cleared if a print job is received or a
button on the control panel is pressed.
You can set the time before entering sleep mode from
1 to 60 minutes. At default settings, the printer enters
sleep mode if no operations are performed for 4
minutes. You can change the Sleep Timer in "General
Settings".
"General Settings" on page 111
U
Note:
When the printer enters sleep mode, the control panel's
screen goes blank as if the power has been turned off,
but the power light remains on.
Introduction
*
). The colors of print outs
Power Off Timer
The printer is equipped with a Power Off Timer
option that automatically turns the printer off if no
errors occur, no print jobs are received, and no control
panel or other operations are performed for a set
period of time. You can set the time until the printer
automatically turns off from 30 minutes to 12 hours.
The factory default setting is Off. You can perform
Power Off Timer from the "General Settings" menu.
"General Settings" on page 111
U
21