Epson SC-T5400 Series User Manual page 155

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Paper Feed Adjust (Manual) Procedure
The adjustment patterns are printed twice. Visually
check the adjustment patterns to make the
adjustments.
The following shows the length and number of sheets
of paper used for adjustment pattern printing.
❏ Roll paper: Approx. 156 mm
❏ Cut sheet: 2 sheets of A4 or larger
A
Touch the following in order from the Home
screen.
❏ Roll paper
Roll paper information area - Media Adjust
❏ Cut sheet
Paper Setting - Cut Sheet(1 sheet) - Media
Adjust
B
Touch Paper Feed Adjust - Manual - Start.
Printing of the first set of adjustment patterns
starts.
c
Important:
When using roll paper with the auto cut
turned off, the paper cannot be removed to
print the second set of patterns even though
printing of the first set of patterns has
finished. Do not pull the printed paper.
C
Enter the numeric value of the pattern with the
least streaks among the printed adjustment
patterns of #1 and then touch Adjustment #2.
In the following example, pattern 0 has the least
streaks so you would enter 0.
If there is no difference between two adjacent
patterns and you are unsure which is the best
one to choose, enter the numeric value that
comes between them. For example, if you are
unsure whether to enter pattern 0 or 2, enter 1.
User's Guide
Problem Solver
D
Select the adjustment pattern of #2 in the same
way as for #1.
E
Touch OK.
Printing of the second set of adjustment
patterns starts. For cut sheet smaller than A2
size, load the second sheet of paper.
c
Important:
When using roll paper with the auto cut
turned off, the part with the first set of
patterns printed on it is pulled inside the
printer in order to print the second set of
patterns. Do not touch the paper with your
hands.
F
Enter the numeric value of the pattern with the
least streaks among the printed adjustment
patterns of #1 and then touch Adjustment #2.
In the following example, pattern 0 has the least
streaks so you would enter 0.
If you are unsure which of two adjacent
patterns is the best one to choose, select the one
that you think has the least streaks. You cannot
enter the numeric value that becomes between
them.
G
Select the adjustment pattern of #2 in the same
way as for #1.
H
Touch OK.
When Print head alignment complete... appears, the
procedure is finished.
The adjustment results are saved as settings of the
currently selected paper type.
155