Removing Cut Sheet (1 Sheet) - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
D
If the paper is inserted straight, touch OK. To
reload the paper, touch Cancel.
If you have touched Cancel, load the paper
again from step 2.
E
On the displayed screen, set the paper type and
size that match the loaded paper.
Not setting the appropriate paper type will
cause print quality trouble. See the following for
more details on the paper types and sizes.
"For Cut Sheet(1 sheet)" on page 38
U
F
For SC-T5400 Series and SC-T3400 Series,
check that the paper basket attached to the
stand is open.

Removing Cut Sheet (1 Sheet)

To remove cut sheet that was loaded but not used,
eject using the procedure below.
A
Touch Paper Setting - Cut Sheet(1 sheet) -
Remove from the Home screen.
This starts paper ejection operation.
B
Hold the edges of the paper with your hands,
touch OK on the screen, and pull the paper
toward you.
User's Guide
Loading and Setting the Paper
36