Epson SC-T5400 Series User Manual page 128

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Settings item
Using the Menu
Settings value Explanation
Oversize The position at which the margin is added depends on the base output
size setting, as shown below.
❏
❏
User's Guide
When set to Auto
Adds the value selected for page margin (area of
following illustration) outside the hard clip area of the PS command
of the data (area of in the following illustration).
When set to a standard size or user defined size
Adds the value selected for page margin (area of
following illustration) outside the size selected for base output size
(area of in the following illustration). With the actual output size,
the margin section becomes larger than the selected size (the area
of in the following illustration).
128
in the
in the