Epson SC-T5400 Series User Manual page 123

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
Settings item
Cut Mode
Margin Refresh
Back Tension 2
Using the Menu
Settings value Explanation
* If you want to reduce operation noise during cutting, set Quiet. If Quiet
Normal
is set, the cutting speed is reduced.
Quiet
* Select whether to automatically cut (On) or not cut (Off) the leading edge
On
in order to remove ink stains that may have been left by previous
borderless printing before printing with borders.
Off
* When one of the following settings is set, this setting is enabled.
1 to 5 (2 )
❏
❏
If wrinkles are formed in the paper during printing even when High is set
in the above Back Tension menu, select Extra High and then configure
the strength of the back tension in this setting.
A higher value produces a higher tension.
User's Guide
Roll paper information area - Advanced Media Setting - Back
Tension - Extra High
Settings - General Settings - Printer Settings - Custom Paper
Setting-Advanced Media Setting - Back Tension - Extra High
123