Enova Dgx Hdmi Output Board - Specifications - AMX Enova DGX 100 Series Hardware Reference Manual

Enova DGX HDMI Output Board - Specifications

DGX HDMI Output Board - Specifications
GENERAL
Compatible AMX Products
Regulatory Compliance
HDMI w/HDCP
Compatible Formats
Signal Type Support
Video Data Rate (Max)
Video Pixel Clock (Max)
Progressive Resolution Support
4K Resolution Support (Max)
HDMI Cable Requirement
Output Re-clocking
Output Scaling
Deep Color Support
HDR Support
Color Space Support
3D Format Support
Audio Format Support
Audio Resolution
Audio Sample Rate
Local Audio Support
DDC/EDID Support
HDCP Support
CEC Support
Output +5V DDC Pin
Connectors
HDMI Output Board
Propagation Delay
HDMI Audio Synchronization
(Embedded Audio Mode)
HDMI Audio Synchronization
(Switched Audio Mode)
Audio Switching Board Support Supports break-away audio switching of 2 CH L-PCM for all channels
* Compatible Enova DGX 100 Series Enclosures are those Enova DGX 800, 1600, 3200 or 6400 enclosures built on or after June 1, 2016
Enova Digital Media Switchers - Hardware Reference Manual
Supported enclosures are Enova DGX 800, 1600, 3200 or 6400 Digital Media Enclosure built after June 1,
2016
See Enova DGX Digital Media Switcher Enclosure for regulatory compliance
DESCRIPTION
HDMI 1.X, HDMI 2.0, HDCP 1.X, HDCP 2.2, DVI
HDMI, DisplayPort++
DVI-D (Single Link With HDMI Cable Adapter)
When used with compatible Enova DGX 100 series enclosures*: 18 Gbps (Max)
When used with compatible Enova DGX 100 series enclosures*: Up to 600 MHz
When used with compatible Enova DGX 100 series enclosures*
480p up to 4096x2160@ 60 Hz 4:4:4 including 3840x2160 @ 60 4:4:4
When used with compatible Enova DGX 100 series enclosures*:
• 3840x2160p @ 24/25/30/50/60 Hz, 4:4:4
• 4096x2160p @ 24/25/30/50/60 Hz, 4:4:4
• 3840x2160p @ 50/60 Hz, 4:2:0
• 4096x2160p @ 50/60 Hz, 4:2:0
Premium Certified High Speed Cable Category 2, Recommended.
HDMI High Speed Cable Category 2, Required
Yes
None
24-bit, 30-bit**, 36-bit**
Output signal follows input format
**30-bit and 36-bit are only supported in CTA-861 formats.
Yes HDR10
Output signal follows input format
• sRGB, BT601, BT.709, BT.220
• RGB 4:4:4; YCbCr 4:4:4 and 4:2:2 and 4:2:0
• Output signal follows input format
• Yes (HDMI Primary Formats)
• Frame Packing 1080p up to 24 Hz
• Frame Packing 720p up to 50/60 Hz
• Frame Packing 1080i up to 50/60 Hz
• Top-Bottom 1080p up to 24 Hz
• Top-Bottom 720p up to 50/60 Hz
• Side-by-Side Half 1080i up to 50/60 Hz
Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital, Plus, DTS-HD Master Audio, DTS, 2 CH through
8 CH L-PCM
16 bit to 24 bit
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
Yes, Insertion of 2 CH L-PCM selectable by channel
Outputs can copy and save connected display EDID for use on Inputs as Custom EDIDs
• Yes, including HDCP 1.x and HDCP 2.x for full matrix HDCP support (includes any input to any or all
outputs)
• HDCP 2.2 support required by input/output board for passage of HDCP 2.2 premium content
• Key Management System
• AMX HDCP InstaGate Pro™ Technology
• Key support up to max 31 devices downstream on one output
None
200mA max per output port
4 HDMI Type A Female Ports
5 us
Audio lags video by 1 ms
Audio lags video by 33ms default – Adjustable down to 1 ms lag
HDMI Input & Output Boards
99