Routing Audio Signals; Audio Routing Capability; System Configuration Interface - Audio Virtual Matrix (Vm 2); Audio Matrix I/O Paths - AMX Enova DGX 100 Series Hardware Reference Manual

Routing Audio Signals

Audio Routing Capability

The audio routing capability of systems with Dante Audio Switching Boards is system dependent:
Audio Routing Capability - per System
Enova DGX 800
Enova DGX 1600
Enova DGX 3200
Enova DGX 6400

System Configuration interface - Audio Virtual Matrix (VM 2)

In the System Configuration interface, the Audio Virtual Matrix (VM 2) is controlled by selecting the Switch Mode: Audio
button. Virtual Matrix (VM) sizes reflect the model of the enclosure. VM 2 includes audio-only signals and audio
embedded on video signals:
System Configuration interface - Audio Virtual Matrix (VM 2)
Enova DGX 800
Enova DGX 1600
Enova DGX 3200
Enova DGX 6400

Audio Matrix I/O Paths

For routing purposes, the audio matrix I/O paths are numbered as follows:
Audio Matrix I/O Paths
Enova DGX 800
Enova DGX 1600
Enova DGX 3200
Enova DGX 6400
A/V and Video input and output ranges cover the basic switching size of the system: 8x8, 16x16, 32x32, or 64x64

Audio only input and output ranges cover the embedded audio as part of the basic switching size of the system,

plus the audio available on the Dante Audio Switching Boards in the expansion slots, plus the assignment of one
input as a down-mixed audio path, which is routed as a separate input:
For switching audio only via the System Configuration interface, use the Audio Switch Mode (VM 2). When embedded
audio is sent as audio only, each signal will be numbered according to the number of the video input or output that
contains the embedded audio. Audio on the Dante Audio Switching Boards will be numbered using the numbering
scheme of the video input or output number +1, +2, +3, etc. per product according to the table below
Dante Audio Switching Boards - Routing Numbers
Product
Enova DGX 800
Enova DGX 1600
Enova DGX 3200
Enova DGX 6400
The input and output numbers in the last column in the table above are the numbers used for routing the Dante Audio
Switching Board's audio paths in the Audio Switch Mode.
For example, on an Enova DGX 800: In the System Configuration interface, to route the source wired to the first connector
on the Dante Audio Switching Input Board in the first input expansion slot, select the Audio Switch Mode and click Input 9.
In addition, audio embedded on an HDMI video input can be routed as an embedded audio-only signal.
For example, on an Enova DGX 800: In the System Configuration interface, to route an embedded audio-only signal from
the source attached to the third connector on the first HDMI Input Board, select the Audio Switch Mode and click Input 3.
Enova Digital Media Switchers - Hardware Reference Manual
16x16 audio I/Os comprised of 8 audio only I/Os and 8 video with embedded audio I/Os
24x24 audio I/Os comprised of 8 audio only I/Os and 16 video with embedded audio I/Os
40x40 audio I/Os comprised of 8 audio only I/Os and 32 video with embedded audio I/Os
80x80 audio I/Os comprised of 16 audio only I/Os and 64 video with embedded audio I/Os
8x8 VMs with the exception of VM2 Audio which is 16x16
16x16 VMs with the exception of VM2 Audio which is 24x24
32x32 VMs with the exception of VM2 Audio which is 40x40
64x64 VMs with the exception of VM2 Audio which is 80x80
1-8 embedded audio, 9-16 audio only, 17 down-mix audio only
1-16 embedded audio, 17-24 audio only, 25 down-mix audio only
1-32 embedded audio, 33-40 audio only, 41 down-mix audio only
1-64 embedded audio, 65-80 audio only, 81 down-mix audio only
Board Orientation
Horizontal
Horizontal
Vertical
Horizontal
Expansion Board Number
Input 1
Output 1
Input 1
Output 1
Input 1
Output 1
Input 1
Input 2
Output 1
Output 2
Dante Audio Switching Boards
.
Connector/Routing Number
Inputs 9-16
Outputs 9-16
Inputs 17-24
Outputs 17-24
Inputs 33-40
Outputs 33-40
Inputs 65-72
Inputs 73-80
Outputs 65-72
Outputs 73-80
160