Enova Dgx 6400 Path Mapping; Attaching Cables; Dante Audio Switching Board Connectors - AMX Enova DGX 100 Series Hardware Reference Manual

Enova DGX 6400 Path Mapping

Enova DGX 6400 Dante Audio Switching Board I/O and Dante Path Mapping
Dante Subscription (EDGX-IN)
Dante channels 01-LEFT,01-RIGHT Enova Stereo Audio Input 65
Dante channels 02-LEFT,02-RIGHT Enova Stereo Audio Input 66
Dante channels 03-LEFT,03-RIGHT Enova Stereo Audio Input 67
Dante channels 04-LEFT,04-RIGHT Enova Stereo Audio Input 68
Dante channels 05-LEFT,05-RIGHT Enova Stereo Audio Input 69
Dante channels 06-LEFT,06-RIGHT Enova Stereo Audio Input 70
Dante channels 07-LEFT,07-RIGHT Enova Stereo Audio Input 71
Dante channels 08-LEFT,08-RIGHT Enova Stereo Audio Input 72
Dante channels 09-LEFT,09-RIGHT Enova Stereo Audio Input 73
Dante channels 10-LEFT,10-RIGHT Enova Stereo Audio Input 74
Dante channels 11-LEFT,11-RIGHT Enova Stereo Audio Input 75
Dante channels 12-LEFT,12-RIGHT Enova Stereo Audio Input 76
Dante channels 13-LEFT,13-RIGHT Enova Stereo Audio Input 77
Dante channels 14-LEFT,14-RIGHT Enova Stereo Audio Input 78
Dante channels 15-LEFT,15-RIGHT Enova Stereo Audio Input 79
Dante channels 16-LEFT,16-RIGHT Enova Stereo Audio Input 80

Attaching Cables

Dante Audio Switching Boards require an HSSI SMA cable (included when required) that attaches from the input board to
the output board (required on all enclosure models except the Enova DGX 6400).

Dante Audio Switching Board Connectors

Dante Audio Switching Boards include two Dante Ethernet connectors (FIG. 70):
Dante Primary Ethernet connector
Dante Secondary Ethernet connector
FIG. 70
Dante Audio Switching Boards - orientation and connectors
NOTE: The HSSI connector is not used on the Enova DGX 6400.
Dante Audio Switching Boards are oriented in the Enova DGX 100 Series models as follows:
Enova DGX 800 – One each horizontal input (left) and output (right) board

Enova DGX 1600 – One each horizontal input (left) and output (right) board

Enova DGX 3200 – One each vertical input (left) and output (right) board

Enova DGX 6400 – Two horizontal input boards (left and right) and two horizontal output boards (left and right)

CAUTION:
Do not install mixed types of expansion boards in the same enclosure. If two types of boards are present, the audio
subsystem is disabled.
Enova Digital Media Switchers - Hardware Reference Manual
Dante ASB Input Board
Enova DGX ASB-DAN Input
Enova Audio Input 81 (down-mix)
HSSI connector
Audio Switching Boards, Dante Audio Switching Boards, and Audio Insert/Extract Boards are not compatible.
Dante ASB Output Board
Enova DGX ASB-DAN Output Dante Subscription (EDGX-OUT)
Enova Stereo Audio Output 65 Dante channels 01-LEFT,01-RIGHT
Enova Stereo Audio Output 66 Dante channels 02-LEFT,02-RIGHT
Enova Stereo Audio Output 67 Dante channels 03-LEFT,03-RIGHT
Enova Stereo Audio Output 68 Dante channels 04-LEFT,04-RIGHT
Enova Stereo Audio Output 69 Dante channels 05-LEFT,05-RIGHT
Enova Stereo Audio Output 70 Dante channels 06-LEFT,06-RIGHT
Enova Stereo Audio Output 71 Dante channels 07-LEFT,07-RIGHT
Enova Stereo Audio Output 72 Dante channels 08-LEFT,08-RIGHT
Enova Stereo Audio Output 73 Dante channels 09-LEFT,09-RIGHT
Enova Stereo Audio Output 74 Dante channels 10-LEFT,10-RIGHT
Enova Stereo Audio Output 75 Dante channels 11-LEFT,11-RIGHT
Enova Stereo Audio Output 76 Dante channels 12-LEFT,12-RIGHT
Enova Stereo Audio Output 77 Dante channels 13-LEFT,13-RIGHT
Enova Stereo Audio Output 78 Dante channels 14-LEFT,14-RIGHT
Enova Stereo Audio Output 79 Dante channels 15-LEFT,15-RIGHT
Enova Stereo Audio Output 80 Dante channels 16-LEFT,16-RIGHT
Dante Primary Ethernet connector
Dante Secondary Ethernet connector
HSSI connector
Dante Audio Switching Boards
158