Enova Dgx Model Specific Aie Notes; Enova Dgx Audio Insert/Extract Boards - Specifications - AMX Enova DGX 100 Series Hardware Reference Manual

CAUTION:
Do not install mixed types of expansion boards in the same enclosure. If two types of boards are present, the audio
subsystem is disabled.

Enova DGX Model Specific AIE Notes

Enova DGX 800 only – Depending on location, AIE Board connectors 1-8 correspond to standard input or output

connectors 1-8. Connectors 9-16 are inoperable.
Enova DGX 3200 only – AIE Boards will not work in conjunction with standard input and output connectors 17-32,

which are on the boards in the last four input and last four output board slots. Remaining standard board slots
should be reserved for input/output boards without audio insert/extract needs.
Enova DGX 6400 only – Numbering overlays are provided for AIE Boards to simplify wiring (see page 181). In the

Enova DGX 6400, AIE Boards in the top portion of the enclosure work with input boards that are also located in the
top portion of the enclosure. AIE Boards in the bottom portion of the enclosure work with output boards that are
also located in the bottom portion of the enclosure.

Enova DGX Audio Insert/Extract Boards - Specifications

Applies to Audio Insert/Extract Board FG1058-705
Enova DGX Local Analog Audio Specifications
Audio Insertion
Audio Signal Type
Analog Input Level (max.)
Input Impedance
Analog to Digital Conversion
Analog to Digital Reference Level
Optimal Analog Audio
Operating Range
Connectors
Audio Extraction
Audio Signal Type
Audio Signal Type Support
Analog Output Level (max.)
Output Frequency Response
Audio Output THD+N
Audio Output SNR
Digital to Analog Resolution
Digital to Analog Reference Level
Optimal Digital Audio
Operating Range
Audio Synchronization
Connector
NOTE: Only 2 channel L-PCM audio is supported from the AIE extraction port. Multi-channel (>2 channel) L-PCM formats
will pass incomplete audio if extracted (only 2 of the multiple channels will be extracted). All other audio formats will be
muted at the extraction port.
Enova Digital Media Switchers - Hardware Reference Manual
Audio Switching Boards, Dante Audio Switching Boards, and Audio Insert/Extract Boards are not compatible.
• Enova DGX 800: Analog stereo, up to 8 channels per enclosure
• Enova DGX 1600/3200: Analog stereo, up to 16 channels per enclosure
• Enova DGX 6400: Analog stereo, up to 64 channels per enclosure
+3 dBu, unbalanced
10 kohms
48 kHz sample rate, 24-bit
+3 dBu = 0 dBfs
-30 dBu to +2 dBu
8 pluggable, dual three-position, terminal blocks each containing two single-ended stereo
contacts (supports 28 to 18 AWG)
• Enova DGX 800: Analog stereo, up to 8 channels per enclosure
• Enova DGX 1600/3200: Analog stereo, up to 16 channels per enclosure
• Enova DGX 6400: Analog stereo, up to 64 channels per enclosure
Requires 2 CH L-PCM (32, 44.1, 48, 88.2, 96, 176.4, and 192 kHz at bit depths of 16, 20, and 24)
+2.8 dBu, unbalanced, >=5 kohms
<+/-0.3 dB, 20 Hz to 20 kHz
<0.04%, 1 kHz, -10 dBu to +2.8 dBu
>95 dB, 20 Hz to 20 kHz, Vin = +3 dBu
24 bit, 2 Channel (stereo audio)
0 dBfs = +3 dBu
-30 dBfs to -2 dBfs
Progressive and interlaced video formats @ 60 Hz frame rate: Audio is actively delayed to match
video within 6.7 ms leading up to 9.3 ms lagging
8 pluggable, dual three-position, terminal blocks each containing two single-ended stereo
contacts (supports 28 to 18 AWG)
.
AIE Audio Insert/Extract Boards
176