Enova Dgx 4K60 4:4:4 Hdmi Input Board - Specifications - AMX Enova DGX 100 Series Hardware Reference Manual

Enova DGX 4K60 4:4:4 HDMI Input Board - Specifications

DGX-I-HDMI-4K60 (FG1061-542) - Specifications
GENERAL
Compatible AMX Products
Regulatory Compliance
HDMI w/HDCP
Compatible Formats
Signal Type Support
Video Data Rate (Max)
Video Pixel Clock (Max)
Progressive Resolution Support
Interlaced Resolution Support
4K Resolution Support (Max)
HDMI Cable Requirement
Input Equalization
Input Re-clocking (CDR)
Deep Color Support
HDR Support
Color Space Support
3D Format Support
Audio Format Support
Audio Resolution
Audio Sample Rate
Local Audio Support
Audio Switching Board &
Dante Audio Switching
Support
DDC/EDID Support
HDCP Support
Enova Digital Media Switchers - Hardware Reference Manual
Supported enclosures are Enova DGX 800, 1600, 3200 or 6400 Digital Media Enclosure built after June 1,
2016
See Enova DGX Digital Media Switcher Enclosure for regulatory compliance
DESCRIPTION
HDMI 1.X, HDMI 2.0, HDCP 1.X, HDCP 2.2, DVI
HDMI, DisplayPort++ (Input Only)
DVI-D (Single Link With HDMI Cable Adapter)
When used with compatible Enova DGX 100 series enclosures*: 18 Gbps (Max)
When used with compatible Enova DGX 100 series enclosures*: Up to 600 MHz
When used with compatible Enova DGX 100 series enclosures*: 480p up to 4096x2160 @ 60Hz, 4:4:4
480i, 576i, 1080i
NOTE: If input is interlaced, all scaled outputs will de-interlace video to a progressive resolution format. If
non-scaled output board or if scaler is in Bypass mode, interlaced input will pass through unaltered.
When used with compatible Enova DGX 100 series enclosures*:
• 3840x2160p @ 24/25/30/50/60 Hz, 4:4:4
• 4096x2160p @ 24/25/30/50/60 Hz, 4:4:4
• 3840x2160p @ 50/60 Hz, 4:2:0**
• 4096x2160p @ 50/60 Hz, 4:2:0**
** Supported by DX-RX-4K when in Bypass Scaling mode.
Premium Certified High Speed Cable Category 2, Recommended.
HDMI High Speed Cable Category 2, Required
Adaptive up to 21ft (7m). Cable distance support dependent on cable quality and signal format
Yes
24-bit, 30-bit***, 36-bit***
***30-bit and 36 bit are only supported in CTA-861 formats. When switched to an output board or RX with
Scaling support the Scaler must be in Bypass mode.
Yes, HDR10 with ST.2084 EOTF
Output signal follows input format
Note: Requires the use of HDR compatible output board such as 4K60 HDMI Output Board
sRGB, BT.601, BT.709, BT.2020
RGB 4:4:4 , YCbCr 4:4:4, 4:2:2, and 4:2:0
• Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4 on scaled
output
• Output signal follows input format on non-scaled output boards
• If 4:2:0 is switched to a 4K RX the RX scaler must be set to bypass
• Frame Packing 1080p up to 24 Hz
• Frame Packing 720P up to 50/60 Hz
• Frame Packing 1080i up to 50/60 Hz
• Top-Bottom 1080p up to 24 Hz
• Top-Bottom 720p up to 50/60 Hz
• Side-by-Side Half 1080i up to 50/60 Hz
Note: If scale is present on corresponding output board or the RX it must be set to Bypass mode
• Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS-HD Master Audio, DTS, 2 CH through
8 CH L-PCM
• Dolby Digital and DTS support up to 48 kHz, 5.1 channels
16 bit to 24 bit
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Yes, extraction of 2 CH L-PCM selectable by channel
• Supports break-away audio switching of 2 CH L-PCM for all channels
• Supports down-mix from one input channel of Dolby True-HD, Dolby Digital, DTS-HD, DTS, or 2 to 8
channel L-PCM
Note: Down-mix supported on 4K video inputs with pixel clocks up to 297 MHz
(up to 4096x2160p@30 Hz)
• EDID provided by Enova DGX Digital Media Switcher to the digital (HDMI) port input and includes
presets
• EDID is user re-programmable
• Yes, including HDCP 1.x and HDCP 2.x for full matrix HDCP support (includes any input to any or all
outputs)
• HDCP 2.2 support required by input/output board for passage of HDCP 2.2 premium content
• Key Management System
• AMX HDCP InstaGate Pro™ Technology
• Key support up to 31devices per output
4K60 HDMI Input & Output Boards
83