Enova Dgx Hdmi Boards - Specifications - AMX DGX1600-ENC Hardware Reference Manual

InstaGate Pro® and SmartScale®
HDMI Boards are HDCP 1.4 compatible and feature InstaGate Pro Technology* for low-latency switching of HDCP protected

content and support computer video up to 1920x1200 and HDTV up to 1080p. The HDMI Boards also support embedded
audio, both linear PCM (stereo audio) and non-linear PCM (Dolby Digital, DTS, Dolby TrueHD, etc.).
4K HDMI Boards are HDCP 1.4 compatible and feature InstaGate Pro Technology* for low-latency switching of HDCP

protected content and support progressive resolutions from 480p up to 4096x2160p@60Hz (Y/Cb/Cr 4:2:0). 4K HDMI
Boards also support embedded audio, both linear PCM (stereo audio) and non-linear PCM (Dolby Digital, DTS, Dolby
TrueHD, etc.).
HDMI Boards meet HDCP Standards. For information on HDCP functionality for HDMI Boards, see "HDCP Support on Enova

DGX Switchers" on page 70.
HDMI Boards provide EDID emulation support with plug-and-play information provided by the Enova DGX Switcher.

HDMI Output Boards feature SmartScale Technology which automatically responds to the display's preferred EDID

information and scales the video to the best resolution and video settings for that display without manual setup.
* InstaGate Pro Technology eliminates HDCP latency and interruptions on all displays in a system. (These conditions are typically
experienced when HDCP authenticates HDMI source and destination devices.) With InstaGate Pro Technology, when a source
requires HDCP encrypted content, the inputs and compliant downstream devices are automatically authenticated – it just works.
Enova DGX HDMI Boards – Specifications
This section applies to HDMI Input Board (FG1058-540) and HDMI Output Board (FG1058-550). Specifications for 4K HDMI Input
Board FG1061-540 begin on page 65.
HDMI Specifications
Compatible Formats
Signal Type Support
Video Data Rate (max.)
Video Pixel Clock (max.)
Progressive Resolution Support
Interlaced Resolution Support
2K Resolution Support
Input Equalization
Input Re-clocking (CDR)
Output Re-clocking
Output Scaling
SmartScale Output Resolution
Support
Deep Color Support
Color Space Support
3D Format Support
Audio Format Support
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
HDMI, HDCP, DVI
• HDMI
• DVI-D (single link with HDMI cable adapter)
• DisplayPort ++ (Input only, with HDMI cable adapter)
4.95 Gbps / 6.75 Gbps
• 6.75 Gbps is only supported when the HDMI Output Board Scaler is in Bypass mode and format
is 1080p60 or less
165 MHz / 225 MHz
• 225 MHz is only supported when the HDMI Output Board Scaler is in Bypass mode and format is
1080p60 or less
480p up to 1920x1200,60Hz
480i, 576i, 1080i
2048x1024@47Hz; 2048x1080@60Hz; 2048x1152@60Hz; 2048x1536@24Hz
• 2K formats are only compatible with DVI, HDMI, and DXLink Fiber Input/Output Boards and
require the output scaler to be set in Bypass mode
Yes, adaptive up to 100 ft. (30 m) at 225 MHz
• Cable distance support dependent on cable type and signal format
Yes
Yes
SmartScale, Manual Configuration, Bypass
All resolutions between 480p and 1920x1200@60Hz via automatic SmartScale query of the
display's preferred EDID Detailed Timing Definition
24-bit, 30-bit, 36-bit
30-bit and 36-bit are only supported when the HDMI Output Board or DXLink RX Scaler is in Bypass
mode and format is 1080p60 or less.
RGB 4:4:4
YCbCr 4:4:4 and 4:2:2
• Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
• Frame Packing 1080p up to 24 Hz
• Frame Packing 720p up to 50/60 Hz
• Frame Packing 1080i up to 50/60 Hz
• Top-Bottom 1080p up to 24 Hz
• Top-Bottom 720p up to 50/60 Hz
• Side-by-Side Half 1080i up to 50/60 Hz
NOTE: The Scaler on corresponding output board or RX must be set to Bypass mode.
Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM
• Dolby Digital and DTS support up to 48 kHz, 5.1 channels
Enova DGX HDMI Boards
63